Industry News

Matters needing attention in the health and safety of lead-free solder wire

Views : 37
Update time : 2022-09-23 11:36:29
Solder wire is an important industrial raw material for connecting electronic components in welding lines, and is widely used in the electronics industry, home appliance manufacturing, automobile manufacturing, maintenance industry and daily life.
This product does not contain regulated specific chemical substances, nor does it contain organic fluxes as specified in the Organic Poisoning Prevention Rules, but necessary precautions are still required to ensure human health and safety.
1. Lead-free solder wire is a chemical product, which is mixed with various chemical components and is not edible.
2. During the soldering process of lead-free solder wire, part of the smoke generated by the flux in the solder wire will stimulate the human respiratory system, and prolonged or repeated exposure to the waste gas may cause discomfort, so ensure that the job site is ventilated Good, welding equipment must be equipped with adequate exhaust to remove exhaust gas.
3. Eating, drinking and smoking are not allowed during the operation of lead-free solder wire. After the operation, you must wash your hands with soap or warm water before eating.
4. Although the lead-free solder wire has a very high flash point in the solvent system, it is still flammable and should be kept away from fire sources. In case of accidental fire, use carbon dioxide or chemical dry powder fire extinguisher to put out the fire, never use water to put out the fire.
Related News
Read More >>
The scope of use of solder wire and solder bar The scope of use of solder wire and solder bar
Feb .09.2023
There are some things you don't know about the use of solder wire, solder bar, and the scope of use
Proper use of solder wire Proper use of solder wire
Feb .09.2023
Proper use of solder wire and commonly used auxiliary materials
What causes a lot of tin slag when using solder bar? What causes a lot of tin slag when using solder bar?
Feb .08.2023
关于波峰焊中的无铅焊锡条锡渣问题,一般情况下黑色粉末状的锡渣是正常的,而豆腐状的锡渣是不正常的。然而不正常锡渣发生的首要原因有以下几点:
What kinds of classification are there according to the solder bar? What kinds of classification are there according to the solder bar?
Feb .08.2023
What kinds of classification are there according to the solder bar?A tin electrode is a electrode used for tin welding. Tin welding can be used for sealing metal welding without high temperature and high pressure. Depending on the liquidus temperature critical point, there are high temperature solder bars and low temperature solder bars.